SCREENS

K2 Corporation has a range of screens designed to remove gross and fine solids (3 mm to 50 mm) from waste water. The screens use stainless steel wedge wire or perforated metal. In many cases the screens can be retrofitted to existing systems with little or no civil work required. Some screen designs incorporate secondary dewatering to form a waste with a volume reduction of 50% or greater.

K2 MEGA SCREEN- K2 TURBO SCREEN- K2 ROTATING SCREEN

Some applications:

K2 Mega Screen (In Channel Bar Screens)

The K2 Stainless steel racked bar screen is designed for the most robust applications with features that makes it easy to operate and maintain. The screen is constructed of 304 Grade Stainless Steel and incorporating pneumatic operation with engineering plastics for major wear areas. The plastic wear parts are simply replaced to return system to new operating condition. Lubrication is not required.

K2 has a range of screen sizes and can adapt to most conditions above and below the ground including trench width and depth.

The heavy duty design lends the unit to industrial waste applications where difficult solids removal at large quantities is required.

K2 Turbo Screen

K2 Turbo Screen is an effective method of removing solids from waste water, the unit has a similar function to the Mega screen although the added advantage of a second dewatering zone which can reduce the volume to 50 % or more.

The screw conveyor runs parallel with the flow of material and has a perforated metal screen normal to the flow. When the solids build up over this screen build up and the level upstream of the unit starts to rise the system begins to screw the solids up the conveyor, this continues until the level of waste water lowers.

D = Downstream of screen, level control senses when level has built up and activates screw. E = Screened Waste Water F = Solids Disposal.

Back to Equipment main page